Carbon Fibre Tube Roll Wrapped 1000mm Length Different Diameters Plain Gloss Black

Our Carbon Fibre tubes ares very strong and have a  perfect ratio of reinforcement  and pressure consolidation during oven curing and are made to engineering tolerances.

These are perfect for model making, RC Industry, styling, Small Structural Applications.. They are very light, strong & easy to cut at home.

•  
• Race Cars & Automotive
•  
• Drones
•  
• Industrial Robotics
•  
• Musical Instruments
•  
• Furniture
•  

Specifications - 

Technical Information about Carbon Fibre Roll Wrapped Tubes

Material Composition

• Fiber Type: 3K plain weave carbon fiber (woven fabric).
• Matrix Material: Epoxy resin or other high-performance polymer resins.
• Weave Pattern: Plain weave (checkerboard appearance).
• Finish: Glossy clear coat for UV protection and enhanced aesthetics.

Mechanical Properties

• Tensile Strength: ~3500 MPa (depending on fiber grade and curing process).
• Modulus of Elasticity: ~230 GPa.
• Flexural Strength: ~1000 MPa.
• Impact Resistance: Excellent resistance to cracking and delamination.

Physical Properties

• Density: ~1.5–1.6 g/cm³ (approximately 50% lighter than aluminum).
• Weight-to-Strength Ratio: Exceptionally high (5x stronger than steel at a fraction of the weight).
• Thermal Expansion Coefficient: Near zero (~0–1 ppm/°C), providing stability under thermal changes.
• Operating Temperature Range: -40°C to +120°C (higher ranges possible with specialized resins).

Dimensional Properties

• Outer Diameter (OD): Typically ranges from 6 mm to 150 mm (customizable).
• Wall Thickness: From 0.5 mm to 5 mm (dependent on application).
• Length: Commonly 1 m to 3 m (customizable).
• Tolerance: ±0.1 mm for OD and ±0.05 mm for wall thickness.

Surface and Aesthetic Features

• Gloss Finish: High-quality clear coat for an elegant, reflective appearance.
• UV Resistance: Gloss layer provides added protection against UV degradation.
• Abrasion Resistance: Smooth surface minimizes wear from environmental exposure.

Application Suitability

• Load Capacity: Ideal for moderate-to-high axial, torsional, and bending loads.
• Multidirectional Strength: Balanced properties from the plain weave design.
• Aerodynamics: Smooth, low-friction surface suitable for performance-critical applications.

This technical data is representative and may vary based on manufacturing methods, resin systems, and specific design requirements. Always consult with the manufacturer or supplier for precise specifications tailored to your application.

Gloss plain weave carbon fiber roll-wrapped tubes are highly versatile composite materials widely used in industries such as aerospace, automotive, sports, and robotics. These tubes are constructed by wrapping carbon fiber sheets, often in a plain weave pattern, around a mandrel and curing them with resin. The plain weave pattern, characterized by its crisscrossed, checkerboard-like appearance, not only adds to the tube's visual appeal but also ensures uniform strength and stability across its surface. The glossy finish enhances the aesthetic, providing a sleek, professional look that is sought after in high-performance and luxury applications.

One of the key benefits of using gloss plain weave carbon fiber tubes is their remarkable strength-to-weight ratio. Carbon fiber is five times stronger than steel while being significantly lighter, making these tubes ideal for applications where weight reduction is critical without compromising structural integrity. The roll-wrapping process ensures high consistency and precision in the tube's diameter and thickness, allowing for excellent mechanical properties. This makes them suitable for demanding environments where mechanical stress, vibration, or impact is a concern.

The plain weave pattern of these tubes offers balanced strength in multiple directions, which is beneficial for applications that require consistent performance regardless of the load orientation. While other weaves, such as twill or unidirectional patterns, may provide specific advantages in certain directions, the plain weave ensures reliability and durability across a broader spectrum of forces. This attribute is particularly important for uses in sporting equipment, drones, and robotics, where dynamic and multidirectional forces are common.

The glossy finish on these carbon fiber tubes is not merely for aesthetics; it also serves functional purposes. The smooth surface reduces air and fluid resistance, which is advantageous in aerodynamics and hydrodynamics. Additionally, the glossy layer provides some protection against UV rays, environmental wear, and minor surface abrasions, extending the tube's service life. In applications like bicycle frames, tripod legs, and custom automotive parts, this combination of form and function is highly valued.

Overall, gloss plain weave carbon fiber roll-wrapped tubes represent a pinnacle of modern material engineering. They combine lightweight construction, exceptional strength, and visual sophistication into a single product that meets the rigorous demands of advanced industries. Their versatility allows them to be used in a range of projects, from high-speed racing cars to precision scientific instruments, making them a cornerstone of innovation and design.